Description
Coil Specifications
- Advanced coil with 5/8 inch tubes
- Coils can be produced with fin spacing of 5, 6.5, 7, 10, and 12 mm according to unit capacity
- Option for double fin production
Unit Capacity
- SA evaporators are produced in 53 models with nominal capacities ranging from 5 to 144 kW
- Suitable for cold storage below and above zero, pre-cooling, and blast freezing tunnels
Body Specifications
- Unique body coating made of galvanized sheet with electrostatic paint
- Special body design for enhanced durability and aesthetics
- Hinged doors with locks on both sides of the evaporator for easy access to terminals and expansion valve during service and maintenance
- External hinged drip tray for easier periodic maintenance
- Internal drip tray made of aluminum for better heat transfer and complete ice melting without dripping into the drain hole
- Special external drip tray structure to fully direct defrost water
Electrical and Fan Specifications
- Axial fan
- Operating range: -40°C to +60°C
- Equipped with internal overload
- Thermal class F and protection class IP54/IP55
- Fans of 40, 50, and 63 cm used depending on unit capacity
Heating Element Specifications
- Defrost and drain elements manufactured by Sedes, Italy, with heat-resistant silicone wire, wired inside a junction box
- Elements wired in series to reduce potential difference to 190V, increasing lifespan
- Fully moisture-resistant wire insulation
- Element retaining clips
- Fan perimeter elements for preventing fan ice on 50 cm+ fans (always active)
- Drain funnel and pipe elements to prevent freezing of drain water (always active)
Other Features
- Defrost thermodisc with flexible mounting positions for proper defrost
- Electrical box with oversized terminals and pre-wired for fans (with overload), drain and defrost elements, fan perimeter, drain funnel, and thermodisc
Reviews
There are no reviews yet.